OBP60 V2 Documentation
Last updated Mar 27, 2026
Question ChatGPT about this page
Note
These pages are still under construction.
The OBP60 multifunction display is used to display data from boat networks such as NMEA0183 and NMEA2000. It can also read data from the 1-Wire and I2C buses. The OBP60 includes a gateway that enables bidirectional data exchange between NMEA0183 and NMEA2000. Data can be imported and exported via Wi-Fi and used on other devices or in third-party software. Configuration is done via a web interface, allowing users to select predefined display pages and define their content. The OBP60 is based on open hardware, open software, and open data. This open architecture allows the device to be adapted to any requirement via the software.
Introduction
Operation
- How it works
- Controls
- Commissioning
- Configuration
- Status
- Config
- Config - System
- Config - Converter
- Config - USB Port
- Config - Serial Port
- Config - TCP Server
- Config - TCP Client
- Config - WiFi Client
- Config - OBP Settings
- Config - OBP Units
- Config - OBP Hardware
- Config - OBP Calibrations
- Config - OBP Display
- Config - OBP Buzzer
- Config - OBP Pages
- Config - OBP Page X
- XDR
- Data
- Update
- Help
- Bus systems
- Data exchange
- Advanced sensor technology
- Example configuration
- Safety instructions
Assembly